Description
Switch mode
1. Open the [Controllers] setting of the [Switch] host and enter
[Change Grip/Order] interface.
2. Press and hold the [B+Home] button for 2 seconds to enter the pairing mode. [LED 2] flashes quickly and releases the button.
Paired successfully in 3-10 seconds. [LED1] is long, the motor is vibrating, and the handle appears on the main screen.
Logo, pairing is successful.
3. If the operation is not performed after 5 minutes, the handle will automatically shut down, long press [HOME] button 2
Connect the host again in seconds and [LED 2] will flash.
4. Charging: Charging in [switch] mode causes the channel light to flash.
PS3 mode connection:
1. Connect to the PS3 main unit with the [TYPE C] line and display the channel light when connected.
When the wired connection is successful, unplug the wired channel light will flash for 2 to 10 seconds to connect via Bluetooth.
PS3 host.
2. This handle supports the PS3 six-axis function.
Android mode connection
1. Press and hold the [Y+HOME] button for 2 seconds to enter the pairing mode. The LED1 light flashes quickly and the Android device is turned on.
Read Bluetooth device [Gamepad] Bluetooth device connection, click on the connection after successful LED 1
The light will be on constantly.
2. Cross key, left and right 3D, L1, L2, R1, R2 and Android handle one-to-one correspondence, – pair
Should [SELECT]+ corresponding to [START], [HOME] can only be turned on and off, camera button corresponding
[TURBO], [Y] corresponds to [X], [X] corresponds to [Y], [B] corresponds to [A], [A] corresponds to [B].
PC mode connection:
1. Press and hold X+HOME to turn on, enter 2.4G mode, channel 3 light flashes, connect
After that, the D-INPUT 2 light is always on, and the mode is switched by long pressing SEL+STA.
The paired receivers are the BM-705 and BM-703S.
2. When connecting to the PC with the [TYPE C] cable, press and hold the START button to insert the cable.
