4 in 1 charge stand for wii

19,50 

4 in 1 charge stand for wii

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Κωδικός προϊόντος: HS-WII016 Κατηγορίες: , ,

Περιγραφή

4 in 1 charge stand for wii

 

Product Acessories

 

1. WII Charger – 1 PC

2. WII handle rechargeable battery — 4 PCS

3. USB-DC 5V Charging Cable—–1 PC

 

Χαρακτηριστικά προϊόντος

 

—It adopts USB-DC 5V power input, which is safe, reliable and versatile;

—It contains four sets of independently controlled charging units, and the unit has built-in intelligent detection, constant current, constant voltage and precision sampling circuits.

— The product is equipped with two sets of handle charging and two battery charging, which can meet the needs of four users to use the WII handle at the same time;

—USB-DC 5V charging cable, fully compatible with USB ports of various types of hosts and PCs;

 

Instructions

 

1. Plug the USB-DC 5V charging cable into the power input hole of the WII charger. The USB plug connects to the USB port of the Wii host or other device. At this time, the LEDs of the four charging parts are bright blue light;

 

2. Place the handle with the rechargeable battery in the front charging slot, place the separate battery in the rear two charging slots, and keep the handle battery in good contact. If the battery is not full, the charging slot turns red light.

 

3. The number of rechargeable batteries and the length of charging time:

According to the internal power consumption of the rechargeable battery, the system will automatically allocate the charging current of the unit and adjust the charging time. It is divided into the following four modes:

 

Mode 1: Use a single rechargeable battery (for example, 500MAH capacity battery) to charge the battery with the shortest charging time, the length of time is about 2 hours, the time will be different due to the difference in remaining capacity of each battery;

 

Mode 2: The two charging units are used at the same time (taking the 500MAH capacity battery as an example) to increase the charging time of the battery saturation, and the time is about 2 to 2.5 hours. The time varies depending on the remaining capacity of each battery;

 

Mode 3: Three charging units are used at the same time (for example, 500MAH capacity battery) to increase the charging time of battery saturation, the time is about 2.5~3 hours, the time will be different due to the difference of remaining capacity of each group of batteries;

 

Mode 4: Four charging units are used at the same time (take 500MAH battery as an example) to increase the charging time of battery saturation, the time is about 3.5 hours, the time will be different due to the difference in remaining capacity of each battery;